Watch the video: Measurement of blood pressure with a handheld device

The manual measures blood pressure equipment: the cuff, a pump attached to it, the doctor’s headset and the scale. This equipment needs coordination, and it is difficult to use if you suffer from hearing or vision defects, or if you cannot move the hand as needed to push the pump and blow the palm when you are ready to measure blood pressure, sit still up to 5 minutes before starting the cuff around the bare arm over the elbow, with a cruel point, pull the point of the board. This is clear to the tip of the nose, place the scale in the palm of your open hand in your hand measured, so you can see it clearly, quickly push the pump with your opposite hand until the scale becomes 30 degrees above the usual systolic pressure (you must flow on the bladder of the palm) and then stop the air, so that the pump must be allowed to reach the air) so that the air is allowed to come out, can achieve so that the air can come out. Decrease with two millimeters two rules for the scorpion each second during listening to the sound of the heartbeat. Note the number that appears when you hear the first sound. This is the systolic blood pressure. Notice if you stop hearing the wrist sounds. This is diastolic blood pressure. You should go comfortably comfortably and wait about two minutes before measuring the pressure again.